Check Point 4000 Bedienungsanleitung PDF herunterladen (Seite 3)

Check Point 4800 Appliance | Datasheet

SPECIFICATIONS

PERFORMANCE

Production Performance

 673 SecurityPower

 5.8 Gbps firewall throughput

 1.1 Gbps firewall and IPS throughput

RFC 3511, 2544, 2647, 1242 PERFORMANCE

(LAB)

 11 Gbps firewall, 1518 byte UDP

 2 Gbps VPN, AES-128

 38,000 max IPsec VPN tunnels

 1.5 Gbps IPS, Recommended IPS profile, IMIX traffic blend

 1.7/3.3

million concurrent connections, 64 byte HTTP

response

 70,000 connections per second, 64 byte HTTP response

EXPANSION OPTIONS

Base Configuration

 8 x 10/100/1000Base-T RJ45 ports

 4 GB memory

 250 GB hard disk drive

 One AC power supply

 Slide rails (22" to 32")

 LOM card

Network Expansion Slot Options (1 slot)

 4 x 10/100/1000Base-T RJ45 ports

 8 x 10/100/1000Base-T RJ45 ports

 2 x 1000Base-F SFP ports

 4 x 1000Base-F SFP ports

 2 x 10GBaseF SFP+ ports

 4 x 10/100/1000Base-T Fail-Open NIC

 4 x 1000Base-F SX or LX Fail-Open NIC

 2 x 10GBase-F SR or LR Fail-Open NIC

Max Configuration

 16 x 10/100/1000Base-T RJ45 ports

 8 x 10/100/1000Base-T RJ45 + 4 x 1000Base-F SFP ports

 8 x 10/100/1000Base-T RJ45 + 2 x 10GBase-F SFP+ ports

 8 GB memory

 Two redundant hot-swappable power supplies

Virtual Systems

 Max VSs: 20 (w/4GB), 25 (w/8GB)

NETWORK

Network Connectivity

 IPv4 and IPv6

 1024 interfaces or VLANs per system

 4096 interfaces per system (in Virtual System mode)

 802.3ad passive and active link aggregation

 Layer 2 (transparent) and Layer 3 (routing) mode

High Availability

 Active/Active - L3 mode

 Active/Passive - L3 mode

 Session synchronization for firewall and VPN

 Session failover for routing change

 Device failure detection

 Link failure detection

 ClusterXL or VRRP

PHYSICAL

Power Requirements

 AC Input Voltage: 100 - 240V

 Frequency: 47-63 Hz

 Single Power Supply Rating: 275 W

 Power Consumption Maximum: 140 W

 Maximum thermal output: 425.6 BTU

Dimensions

 Enclosure: 1U

 Standard (W x D x H): 17.25 x 16.14 x 1.73 in.

 Metric (W x D x H): 438 x 410 x 44 mm

 Weight: 7.6 kg (16.76 lbs.)

Operating Environmental Conditions

 Temperature: 32° to 104°F / 0° to 40°C

 Humidity: 20%-90% (non-condensing)

Storage Conditions

 Temperature: –4° to 158°F / –20° to 70°C

 Humidity: 5% to 95% @60°C

Certifications

 Safety: CB, UL/cUL, CSA, TUV, NOM, CCC, IRAM,

PCT/GoST

 Emissions: FCC, CE, VCCI, C-Tick, CCC, ANATEL, KCC

 Environmental: RoHS

Check Point's SecurityPower is a new benchmark metric that allows customers

to select security appliances by their capacity to handle real-world network traffic,

multiple security functions and a typical security policy.

With GAiA OS and 8 GB memory upgrade

1 2 3 4 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Check Point 4000 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern